[Shotimes] Rear rotor size

[Carl Prochilo]

They are around 10" IIRC.  The 89 thru 92 are vented and the 93 thru 95
are solid.  These rotors have gotten so cheap that it is hardly worth the
effort to go to a PnP.  Last time I bought them they were less than $20 a
piece at AZ.  I wouldn't bother with the el cheapo rotors.  If your
existing rotors aren't too bad, you can get them resurfaced for $10 or
less a piece.
-- 
Cheers,
Carl Prochilo
92 Ultra Red Crimson

On Mon, January 10, 2005 1:25 am, Jon Heese said:
> Out of curiosity, what's the diameter of the Gen2 factory rear rotors?
> I looked through my year or so of list archives and googled the crap out
> of it, but no one explicitly quotes a diameter measurement for the
> rotors.  I suppose I could go outside with a lug wrench and a measuring
> tape, but I reckon someone can throw this out off the top of their head.
>
> Also, I know the size of the front rotors changed a couple times
> throughout the years, but did the size of the rears ever change?  Are
> they the same rotors found on rear disc SLO's of the same vintage?
>
> TIA,
> Jon Heese
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes