[Shotimes] FW: Blend Door Actuator Replacement Experience?

[Leigh Smith]

Nope. But I had both the linkage actuator rod slip off my 89's blend door,
and the gears inside the motor strip due to being jammed by a pencil that
slid down the defogger outlets. (They should have a screen on there or
something). Different symptoms than yours. But $40 part, and 2-1/2 days
effort to pull the dash out at home. Including the heater core, that made
three different dash pulls, ugh!
Lee
----- Original Message ----- 
From: "Alan Fanning" <Awfanning@earthlink.net>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Saturday, January 29, 2005 4:56 PM
Subject: [Shotimes] FW: Blend Door Actuator Replacement Experience?


> Anybody know anything about the below TSB?
>
>     Alan
>
>
> ------ Forwarded Message
> > From: SNAFU DAY <snafu_day@hotmail.com>
> > Reply-To: <baysho@lists.milleredp.com>
> > Date: Sat, 29 Jan 2005 11:27:10 -0800
> > To: <baysho@lists.milleredp.com>
> > Subject: RE: [baySHO] Blend Door Actuator Replacement Experience?
> >
> > There is a TSB out about that now.  Ford says it isnt the motor but is
> > instead a short in the wireing harness which must be replaced in order
to
> > correct the problem.
> > Derek
>
> ------ End of Forwarded Message
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes