[Shotimes] Transmission Shield

[Kevin & Cheryl Airth]

Bill:
 Sorry for the confusion! I was talking about the wrong piece.
Oh well!
.
.
.


> I understand what you're talking about now.  What I am looking for is a
black steel plate that bolts over the transmission, and is held on by 2
bolts above the fill plug on the MTX. It prevents the harnesses and hoses
from getting pinched by the clutch cable arm.
>
> Bill
> My insulation for the rack could stand to be replaced though.

> It's a heavy Aluminum foil type material. Protects the P/S rack from heat.
> Kind of wraps around things and is tie wrapped on from the factory. Not a
> solid piece.
> ..
> ..
>
>
>
> > Is that the shield that goes above the trans for the wires or the one
> between the oil pan and bell housing?  I can't really see the one at the
top
> getting beat up, its a fairly heavy gauge steel.
> >
> > Bill
> > Bill:
> >  I don't have a used one and most of them are torn up by now. The part
> > #E80Y3F540-A. For the MTX . List about $15.
> > For the ATX it's #F3DZ-3F540-A .List about $12.
> > ..
> > ..
> >
> >
> > > I'm looking to purchase the shield that goes on top of the trans and
> > > protects the wire harnesses and vac hoses from the clutch cable arm.
My
> > > car did not come with one and I am looking to replace it.  I'm trying
to
> > > diagnose a clutch problem that I've been having to varying degrees
since
> > > I've owned the car.  When having a helper push the clutch, I can see
the
> > > harnesses, etc. moving around, and I'd like to prevent this. zipties
> > > only help so much.  Anyone have one they don't need?
> > >
> > > Bill Murray