[Shotimes] Starter or Solenoid Update

[SHOZ123]

I just picked up a used MotorCraft OEM starter and would like to
rebuild it myself.

As long as the windings are all good then it's just 4 brushes and
clean the yoke lever thing (Bendix drive?) so it operaters smoothly
right?  What about the solenoid itself?

Paul


On Fri, 4 Mar 2005 11:59:16 -0600, Al Fitz <alfitz@alfitz.com> wrote:
> It will get worse, sorry.
> 
> A good used FORD starter is always better than a third rate rebuild.
> 
> Al Fitz
> alfitz@alfitz.com
> SHO Parts at
> http://www.alfitz.com/sho
> *************************************************************************
> PLEASE INCLUDE A COPY OF THIS EMAIL IN YOUR REPLY
> *************************************************************************
> 
>   ----- Original Message -----
>   From: Peter Maggiacomo
>   To: shotimes@autox.team.net
>   Sent: Friday, March 04, 2005 11:44 AM
>   Subject: [Shotimes] Starter or Solenoid Update
> 
>   Got under the car this morning and checked all wires
>   to my less than one month old Advanced Auto rebuilt
>   Ford starter, and all connections were fine.
>   Rapped on starter with the wooden handle of a hammer
>   and BINGO, it started right up.
>   Question... will this new starter work this out of
>   itself or only get worse? I hate to do the job twice
>   if I don't have to. Thanks.
>   -Pete
>   _______________________________________________
>   Shotimes mailing list
>   Shotimes@autox.team.net
>   http://www.team.net/mailman/listinfo/shotimes
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes