[Shotimes] Sparkplugs covered in oil?
Zach Leahy
Zach Leahy <leahyz@gmail.com>
Wed, 16 Mar 2005 15:18:49 -0500
I have also used a length of small diameter rubber hose and attached
it to the shop vac. It makes a good suction and is really fast.
don's right though, you can simply clean out the wells and that will
by you some time vs resealing them.
Z
On Wed, 16 Mar 2005 13:59:25 -0600, Donald Mallinson <dmall@mwonline.net> wrote:
> Dave,
>
> What a great tip! Thanks, that is outside the box thinking.
>
> Don
>
> Dave wrote:
>
> > It's easier to get the oil out with a hand soap pumper. My wife still
> > wonders where that went! then you can get the thin screwdriver and rag
> > down there then pull the plugs and do it again. I'm pushing about 20K on
> > the RTV sealed valve covers and it's still dry............... I assume
> > later it will be wet as hell now.
> > Dave
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes