[Shotimes] Vibration or picky...again
cmichaelo@optonline.net
cmichaelo@optonline.net
Mon, 21 Mar 2005 12:00:59 -0500
Ian,
I don't get it. What might happen when I pull on the hub?
The hub and bearing are held firmly in place onto the spindle by the hub nut. So I don't see what can be discovered by pulling straight out.
So maybe you mean pulling to the side or up to see if the hub moves?
Michael
94MTX,green,BOS+,Koni/Intrax,Baer,Corbeau
SHO items for sale: http://hometown.aol.com/cmichaelo/for_sale.html
----- Original Message -----
From: Ian Fisher <dataflash@yahoo.com>
Date: Monday, March 21, 2005 11:42 am
Subject: Re: RE: [Shotimes] Vibration or picky...again
> If you have not already, remove the brakes and pull on
> the suspected hub. I've had bad bearings that passed
> the wheel jiggle test but were ready to fall out of
> the spindle when the brakes were removed.
>
> Ian
> --- cmichaelo@optonline.net wrote:
> > I have not completed all measurements of runout on
> > rim, hub, and rotor. Lateral and radial.
> > Everything is within spec. No wobbling when spinning
> > the front tires in the air.
> >
> > The tires are new (Pilot Sport 235/40-18). I have
> > solid subframe bushings. And TPR everywhere. New
> > Koni/Intrax. New strut bearings. Strut tower braces.
> > Relatively new inner and outer tie rods and
> > relatively new LCAs.
> >
> > However, on the road, I CONTINUE to have a vibration
> > at around 65-70mph, predominantly in the steering
> > wheel.
> >
> > ...and THE VIBRATION IS NOT ALWAYS THERE????
> >
> > It's driving me nuts.
> >
> > Could it be something that is not related to the
> > rotating stuff, but rather could it be
> > - the wheel bearing, though the
> > push-and-pull-on-the-top-and-bottom-of-the-wheel
> > wriggle test passes with flying colors.
> > - LCA, but wouldn't that show up in the wriggle
> > test?
> > - steering rack?
> >
> > I suppose the LCA could be sort of loose, e.g.,
> > maybe it has come loose at the subframe, but not
> > enough that I can move it, but enough that it may
> > show up on the road where the weight of the car
> > makes it move in and out?
> >
> > Has any of you had any trouble with vibration due to
> > the steering rack?
> >
> > The rack is 11y old now, and has 130k on it.
> >
> > Also, as a reminder, I did have a bent rim about 50k
> > ago. It not only bent the rim it also warped it
> > laterally and even destroyed the strut mount. The
> > hub, as mentioned above, seems to have survived
> > though. The studs are fine too.
> >
> > Any other advice?
> >
> > Michael
> > 94MTX,green,BOS+,Koni/Intrax,Baer,Corbeau
> > SHO items for sale:
> > http://hometown.aol.com/cmichaelo/for_sale.html
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes
> >
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Small Business - Try our new resources site!
> http://smallbusiness.yahoo.com/resources/