[Shotimes] Re: radiators and overflow bottles

[Zach Leahy]

heh,  my plan for now is to modify a nalgene bottle.  it's lexan, so
the material is fine, and it's clear so you can see the level....  It
should mount just fine to something with a few big hose clamps.  
Knock offs can be had for aout $4 and hold 1L.  I don't see any reason
this would _not_ work jsut fine.  there should be no reason it does
not pass tech.

Z

On 5/3/05, Kevin & Cheryl Airth <clubairth@peoplepc.com> wrote:
> Or to use a ATX unit that mounts inside the passenger fender out of the way.
> .
> .
> 
> > I'm very behind on my mail, but if you're careful, you can coax the MTX
> > overflow bottle into it's spot.  Only the left side of the bracket will
> > mount to the rail, and the bottom tab will just hang loose, but the bottle
> > is snug and won't go anywhere.
> > --
> > Cheers,
> > Carl Prochilo
> > 92 Ultra Red Crimson
> >
> > On Wed, April 6, 2005 4:02 pm, Zach Leahy said:
> > > There is the autozone "non-standard cooling" which means  "much
> > > thicker core" rediator.  I use this in my car.  problem is the
> > > overflow bottle won't fit.  I guess it gives me an excuse to put my
> > > battery in the trunk.
> > >
> > > Z