[Shotimes] official weight of a slicer?

[Dave Kegel]

FWIW, It looks like ROH is no longer importing the 16 x 8 Snyper, which is
what I was considering for my track wheels.  They do have the ZS model
available in 16 x 8, with 38mm offset, but I'm not positive it has the same
spoke clearance as the Snyper.  I'm also having a hard time finding out the
weight of this model.

I'd probably order the 17 x 8 TD wheels too, if they actually existed.

Dave

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Mark Nunnally
Sent: Friday, May 06, 2005 1:30 PM
To: shotimes@autox.team.net
Subject: Re: [Shotimes] official weight of a slicer?


> Mark,  Is the extra 0.5" that important?

yes.

and other things, like HUGE caliper to spoke clearance, proper offset,
"open" for good brake cooling.  only down side is they are ugly :)  these
are for track only btw...

>These wheels I have are very
> attractive and quite an excellent value IMO.

got a link to a pic?

>Life's too short
> to be tortured over something like this, so I just look for something  
>already commercially available that does the job.

when it gets to that point, you don't compromise, you just get a new car :)

mark
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net http://www.team.net/mailman/listinfo/shotimes