[Shotimes] BREAKING NEWS: Jumping bolt incites fishing trip

[bjshov8]

I must be lucky- I never had any problems pulling the Y-pipe off of my 90.
When doing the 60k, one of the cam tools fell down the oil galley in the
front of the head.  I didn't know if it made it into the pan or not so I
pulled the pan.  The tool was laying in the bottom of the pan and more than
likely would never have caused a problem.


> I figured that if the screw had landed on the bottom of the pan it
> couldn't cause any damage, but I did not want to take a chance on the
> screw being perched on the stud girdle or crank.  After draining the oil
> in hopes of pulling the screw through the drain hole and finding that
> the hole is just barely too small, I was prepared to drop the pan and
> root around until I found it.  That brings me to tonight.
>
> Tonight was to be the night to drop the pan and retrieving the screw.