[Shotimes] SHO Subframe bushings/bolts--how to check?

[Ron Porter]

That noise sounds like a bad endlink. When the SFBs go bad, you may get some
noise, but you can feel the subframe shift, especially if you have a rod
shifter.

You are due for new SFBs, unless you know if they were changed in the last
75K miles.

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Jim Koper
Sent: Wednesday, May 18, 2005 4:19 PM
To: shotimes@autox.team.net
Subject: [Shotimes] SHO Subframe bushings/bolts--how to check?

What is the way to check if the SFBs (originals) are in need of replacement?
I had the recall done several years ago, so the bolts should be OK. I do
hear a metallic creak/tap when a turn left only, thought it might be
subframe bushing-related. It might ultimately be a problem elsewhere, but I
wanted to rule out the SFBs. Thanks.

Jim Koper
1992 red on black
151,000 miles
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes