[Shotimes] +20 cam dyno results

[Mike Bruce]

Just got back from the dyno.  Made four runs to get a baseline for
tuning.  From the start of the run up to 5750 rpm, there was no change
from before the cam install.  By 6k, there was a 5hp difference, at 6250
was a 12hp change, 18hp at 6500, 22 hp at 6750, and 24 hp at 6900 rpm.
Peak horsepower is now 195 at 6300 rpm.  Previously, it was 184 at 6000.

That is without tuning the LPM.  The A/F ratio runs between 12.5 and
11.9.  Perhaps there is a little to gain there.

I need to move the shift points up to take advantage of the new power.

What kind of results are other people getting from cams?

Mike Bruce