[Shotimes] Accounting for Road Crown in Setting Alignment
Bruce Malachuk
bmalach1@nycap.rr.com
Wed, 2 Nov 2005 11:57:19 -0500
Same here, 2.95 of positive on each side
Bruce J Malachuk
* 94 Opal Frost MTX
* 93 Emerald Green MTX - SOLD but not far away
* 95 Silver Frost ATX SE - SLO - Gonna be the winter beater again
* 94 White ATX LX - SLO - $100 investment car
* 96 TR - Cam Failed parts car :-(
* 97 ES - Cam Failed but will be revived shortly - 9/12/05
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Paul L Fisher
Sent: Wednesday, November 02, 2005 11:10 AM
To: 'Dave Kegel'; shotimes@autox.team.net
Subject: RE: [Shotimes] Accounting for Road Crown in Setting Alignment
Same here.
Paul L Fisher
Visit my website: http://www.paul-fisher.com SHOClub Member:
http://www.shoclub.com Amsoil dealer: http://www.paul-fisher.com/oil
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Dave Kegel
Sent: Wednesday, November 02, 2005 10:01 AM
To: shotimes@autox.team.net
Subject: RE: [Shotimes] Accounting for Road Crown in Setting Alignment
I always set both sides even and never notice any issues with crowned roads.
YMMV
Dave
-----Original Message-----
> I notice that the alignment specs on the SHOtimes FAQ make no mention
> of offsetting the alignment on one side to account for road crown. Is
> this correct - equal settings on both sides? Or should some further
> refinement in the numbers be made?
>
> Alan
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes