[Shotimes] My Proposed Alignment Specs
Leigh Smith
Leigh Smith" <leigh1322@comcast.net
Fri, 11 Nov 2005 09:12:59 -0500
looks good
lee
----- Original Message -----
From: "Alan Fanning" <Awfanning@earthlink.net>
To: "SHOtimes" <shotimes@autox.team.net>
Sent: Thursday, November 10, 2005 9:09 PM
Subject: [Shotimes] My Proposed Alignment Specs
> Having failed to obtain suitable alignment results the last time around, I
> want to make sure that I'm asking for the right specs now.
>
> The car is a '95 ATX with stock springs, GM rear control arms, Tokico
struts
> and strut tower welds broken. The car is intended to be my wife's daily
> driver/freeway runner, rather than a canyon carver.
>
> Here's what I plan to ask for, based on the SHOtimes FAQs:
>
> Front Specs
> Toe: neutral to 1/32'nd inch toe-in per side, balanced per side
> Caster: max available, balanced per side
> Camber: -0.5 to -1.0 degrees per side as possible, balanced per side
>
> Rear Specs
> Toe: neutral to 1/32'nd inch toe-in per side, balanced per side
> Camber: -0.25 degrees per side, balanced per side
>
>
> For the front I know from past experience that the best I'm likely to get
> for camber is -1.0 degrees per side.
>
> Thx.
>
> Alan
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes