[Shotimes] Eibach's on ATX SHO's?

[Ron Porter]

Yeah, the progressive part of the spring has a higher spring rate than the
stock springs, but it could sit fractionally lower (than an MTX) at rest
while it's using the "soft" part of the Eibach.

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Ian Fisher
Sent: Saturday, October 08, 2005 2:05 PM
To: Alan Fanning; Tech SHO List; SHOtimes
Subject: Re: [Shotimes] Eibach's on ATX SHO's?

It'll be lower than a similiarly equipped mtx. Other
than that, I didn't have issues with Eibachs on my ex
94 atx. Just make sure you use struts that will dampen
the higher spring rates.

Ian

--- Alan Fanning <Awfanning@earthlink.net> wrote:

> Are there any issues with using Eibach's on an ATX
> SHO? Due to the
> additional front end weight?
> 
>     Alan
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
> 



	
		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes