throttle bodies Re: [Shotimes] duplicolor spray painting the car

[Paul Nimz]

Actually that's for a Mustang but it looks good to me.

Paul

On 10/15/2005 2:47:23 PM, Ian Fisher (dataflash@yahoo.com) wrote:
> Just to confirm, M4-.7x8mm is for the V6 throttle
> body, not the V8, right? (or both)...
>
> Thanks!
> Ian
>
>
>
> --- Paul Nimz <pnimz@v8sho.com> wrote:
>
> >
> I've never had any luck taking the screws out.  I
> > would try to dermal the ends off.  The screw is a
> > M4-.7x8mm.  On the V8 the secondary butterfly screws
> > come out easily.  I've
> though about PC the TB but
> > have not wanted to confront disassembly of the TB.
> > I do have some spares though.
> >
> >
> >
> > Paul (currently baking engine parts) Nimz
> >
> >
> > On 10/15/2005 12:24:49 PM, Ian Fisher
> > (dataflash@yahoo.com) wrote:
> > > Nope. I posted on the forum too, 21 views, 0
> > > responses. After looking at it more closely I
> > >
> don't
> > > see any rubber seals where I thought I had before.
> > >
> > > I assume the nut on the spring side comes off and
> > the
> > > shaft is pulled out after the throttle plate is
> > > removed. However, removing the throttle plate
> > doesn't
> > > look easy. My machinst thinks the screws were shot