[Shotimes] Front wheel bearing replacement

[Peter Chase]

Another thing to note is that the CV boot on that side is torn. No clicking
yet from the joint itself, just a torn boot. I guess first I should replace
the CV joint and then re-assess the bearing, huh?

On 9/8/05, Leigh Smith <leighsm@comcast.net> wrote:
>
> One more thing,
> make sure it really needs a bearing.
> Tauri front wheel bearings are scary loose when the axle is out and the
> axle
> nut is off.
> The axle nut tightens 'em up considerably. That's normal.
> Measure them with tight nuts!
> ..... (waiting....)
> Lee
>
> ----- Original Message -----
> From: "Peter Chase" <pbchase@gmail.com>
> To: "Sholist" <shotimes@autox.team.net>
> Sent: Wednesday, September 07, 2005 6:34 PM
> Subject: [Shotimes] Front wheel bearing replacement
>
>
> > I was told by NTB that my RF wheel bearing and hub need to be replaced.
> They
> > quoted me 150 parts and 200 labor. I know I can get the part for about
> half
> > that, but how difficult a job is it to replace the bearing and hub? Any
> > special tools needed? Do I have to remove the whole spindle to get the
> > bearing pressed out?
> > Thanks,
> > Peter
> > _______________________________________________
> > Shotimes mailing list
> > Shotimes@autox.team.net
> > http://www.team.net/mailman/listinfo/shotimes