[Shotimes] BARO sensor

[Kevin & Cheryl Airth]

Thanks Paul!
 Much easier than the frequency counter BS! I will keep this one!
.
.




>   Approximate Altitude (Ft.)           Voltage Output (+- .04 Volts)
>                  0                                        1.59
>                  1000                                 1.56
>                  2000                                 1.53
>                  3000                                 1.50
>                  4000                                 1.47
>                  5000                                 1.44
>                  6000                                 1.41
>                  7000                                 1.39
>
> The above data is valid when atmospheric pressure is 30.00"
>
> You should also test the sensor to make sure it holds a vacuum.
>
> Paul
>
>
> On 9/18/2005 9:15:41 AM, Kevin & Cheryl Airth (clubairth@peoplepc.com)
wrote:
> > Thanks Jim!
> > But I forgot the part numbers.
> > MotorCraft #DY-530
> > Ford #E7FZ-12A644-A
> > Echlin(NAPA) #CRB219000
> >
> > I
> > don't have any current prices.
> >
> > "PS: Although the Pobst book does have a way to test every sensor with
an
> > ohm-meter."
> >
> >
> > I have the Probst book but the BP is one of the few sensors that CAN NOT
be
> > checked with a ohm-meter unless it has a frequency counter built in.
Mine
> > does not but maybe it more common than I thought. If anyone has an
easier
> > way to check one, please post it to the list.
> > Thanks!