[Shotimes] gasket material by the sheet

[Ron Porter]

Or Permatex. Big selection at AutoZone:

http://www.permatex.com/selector_chart/selector_chart.asp

Ron Porter

-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of Paul Nimz
Sent: Monday, September 19, 2005 10:23 AM
To: `V6 SHOtimes; Zach Leahy
Subject: Re: [Shotimes] gasket material by the sheet

What about instant gasket from Loctitie?

http://tinyurl.com/arsh4

Paul


On 9/19/2005 7:49:49 AM, Zach Leahy (leahyz@gmail.com) wrote:
> I
> don't think one would probably be cutting a head gasket out of
> material.... That's
> proabably a really bad idea. Don't know about EGR
> gaskets, don't have one,
> but if it is like the exhaust manifold gasket, you
> can reuse them.
> Otherwise yeah, go buy th ebilk sheet at an autoparts place. You can
> usually get a paper kind of stuff (also in a pinch you can use heavy
> paper
> like a brown grocery bag or such, I may have to make a gasket for the IAB
> that way. Done it before on other engines, mostly small ones, with pretty
> good success) The other kind of stuff you can find is a cork based gasket,
>
> and I have used those before in a SHO.
> Z
>
> On 9/19/05, Paul L Fisher <sho@paul-fisher.com> wrote:
> >
> > I would assume you would need different type of gasket material for
> > different types of gaskets. For example, paper would work for an oil
> pump
> > gasket where some sort of metal would be required for EGR gasket and
> some
> > other kind for a head gasket.
> >
> >
> > Paul L Fisher
> >
> > Visit my website: http://www.paul-fisher.com
> > SHOClub Member: http://www.shoclub.com
> > Amsoil dealer: http://www.paul-fisher.com/oil
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes