[Shotimes] How to remove wheels without wheel lock
Bob
bob@hotpursuit.net
Thu, 29 Sep 2005 00:45:19 -0700
I done the socket method and it works great, but I've also used a die
grinder to put a slot in the top of the lugnut and then used an impact
driver to remove it. The impact driver is a cheap tool at harbor freight.
> -----Original Message-----
> From: shotimes-admin@autox.team.net
> [mailto:shotimes-admin@autox.team.net]On Behalf Of M Khan
> Sent: Wednesday, September 28, 2005 11:16 PM
> To: 'Christina Casselton'; 'SHOTimes List'
> Subject: RE: [Shotimes] How to remove wheels without wheel lock
>
>
> This method worked for me when the wheel lock rounded
> itself out. Make sure you got a good size hammer and
> you should be all set.
>
> The socket will be n/a after this so don't buy an
> expensive one.
>
>
> Mike
> 95 MTX
>
> --- Bruce Malachuk <bmalach1@nycap.rr.com> wrote:
>
> > I think if you hammer a 21mm 12 point socket on
> > there whey will come right
> > off. Well it's either a 20 or 21mm 12 point, I can't
> > remember which.
>
>
>
>
> ______________________________________________________
> Yahoo! for Good
> Donate to the Hurricane Katrina relief effort.
> http://store.yahoo.com/redcross-donate3/
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes