[Shotimes] TB removal tips

[krazgeo@comcast.net]

 -------------- Original message ----------------------
From: "Zach Leahy" <leahyz@gmail.com>

> Um, you can take out the 2 8mm screws that hold the cables to the
> bracket as an easy alternative....

Yeah, but that gives you a bunch more loose crap you have to wire out of the way while working in that area.  It is a lot easier to just bungee tie the whole bracket to the hood lifter, or vacuum tree, or something else over behind the strut.  I hate having that thing come b ack and whack my arm while I am doing one handed solder work on the harness for my PFE sensor, after the original one gets burned away by the EGR tube.

(The more I nag about redoing the PFE sensor connector, the less likely it will happen!)

George