[Shotimes] Competition Limited headlight harness
compatibility issue with DRL's
fwhittle@mindspring.com
fwhittle@mindspring.com
Mon, 24 Apr 2006 17:57:59 -0400 (EDT)
Thanks. I wish the news was better. I like not having to worry about turning my headlights on when it rains (CA law). I also like that the DRL's use the high beams at reduced output so there's no additional wear on the low beam filament.
Frank Whittle
'95 ATX
-----Original Message-----
>From: clubairth@bellsouth.net
>Sent: Apr 24, 2006 2:39 PM
>To: fwhittle@mindspring.com, shotimes@autox.team.net
>Subject: Re: [Shotimes] Competition Limited headlight harness compatibility issue with DRL's
>
>Frank:
> I don't think you can run the DRL's and the headlight harness together. I
>have never found anyone who has made the combo work but maybe someone else
>can suggest something. I think if you unplug the DRL module everything
>should work OK. The DRL module is on the drivers side up underneath in the
>front of the front tire. Lay on your back and look in this area to find the
>module. At least unplug it temporarily to see if that is the problem.
>
>Here is the modified circuit so the lamp out module still works for
>everything except the headlight:
>http://www.fortunecity.com/silverstone/jensen/6/diag.htm
>
>Here is a picture of the harness taped up and ready to install. You might
>have different color wires but it was easy to see what needed to be done on
>my 93 ATX.
>http://www.fortunecity.com/silverstone/jensen/6/harness.htm
>I have run this mod for over 5 years with no problems. You can get the
>correct resistors from Radio Shack for a dollar or two.
>.
>Of course you need to know where your lamp out module is first!
>.
>
>
>>I just installed a Competition Limited headlight wiring harness kit in my
>>'95 with Daytime Running Lights. When the headlights are off one of the
>>relays buzzes. It stops buzzing when I turn the headlights on.
>>Additionally, when the headlight switch is off the DRL's shine at full
>>high-beam intensity instead of reduced intensity. Does anyone have any
>>insight into this problem and a possible solution? I've e-mailed
>>Competition Limited as well but want to see if anyone else has run into
>>this problem and has a solution.
>>
>> Another issue with this harness is that the "lamp out" light is lit. I've
>> seen this problem mentioned with other lighting mods. Anyone know how to
>> make the light go out, aside from taping over it or removing it?
>>
>> Thanks.
>>
>> Frank Whittle
>> '95 ATX