[Shotimes] oxygen sensor

[Robert Bruce]

Mtx SHOs use a 3 wire sensor.  The Bosch # is 13942.  While the atx V6 SHOs use a 4 wire sensor, like the 15716 or 15718.

Bob Bruce
92 w/ a mod or two 
95 mtx 100% stock
 
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net] On Behalf Of Zach Leahy
Sent: Wednesday, April 26, 2006 2:14 PM
To: clubairth@bellsouth.net
Cc: Hartberger, Jason M. AT2 (AW); Nic Rudolph; shotimes@autox.team.net
Subject: Re: [Shotimes] oxygen sensor

Ok, I'll buy that, don't have one in front of me, and apparently don't
remember right.

My point does still stand that there are a lot of 3-wire sensors. 
Just not ours.

Z

On 4/26/06, clubairth@bellsouth.net <clubairth@bellsouth.net> wrote:
> Zach:
>  Not to get on you, But I have a Bosch part #15716 new in the box in front
> of me. It has a 4 pin plug and 4 wires. 2 white, 1 black and 1 gray. ALL
> Ford HEGO's are 4 pin,4 wire.
> .
> .
>
>
>
> Am I incorrect, but I think if you count the wires there are only 3.
> Its a 4 place conncetor though.  You should have a signal wire, and 2
> for the heating element.
>
> There are a lot of 3 wire sensors out ther for sure.  Just put one in
> a friend's camry, had to solder it all together (universal sensor)
>
> Z
>
> On 4/25/06, clubairth@bellsouth.net <clubairth@bellsouth.net> wrote:
> > Jason:
> >  Just a few corrections:
> > All Ford HEGO's are 4 wire units.
> > All gen1/Gen2 SHO's have the O2 sensors ahead of the catalytic converters.
> > .
> > .
> >
>
>


--
Zach Leahy
Fort Wayne, IN
1985 BMW K100RT - For Sale!!
1992 SHO MTX - Arrest Me Red
1993 SHO MTX - Green Racecar
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes