[Shotimes] SHO wont Start.....after battery replacement and subframe bushings...?

[Mark Nunnally]

Make sure the DIS module (on the intake) didn't pull loose when you had the
subframe lowered to do the bushings

Mark

On 1/6/06 9:35 PM, "Adam Phillips" <adambant@hotmail.com> wrote:

> I installed aluminum subframe bushings in my 92 MTX SHO today. Everything
> went smoothly. Then i went to start my SHO to go for a ride and duh, i had
> my radio on for the past 2 and half hours or so while i was working, ok, no
> biggy, i drained the battery. I decided id just run down to Autozone and get
> a new one, as this one was on its way out anyways. So i get the new
> Duralast, and put it in. Turn the key, cranks like a champ....and keeps on
> cranking like a champ, with one problem, car never actually starts. Wth?  I
> did some trouble shooting. Im got plenty of fuel pressure. All fuses are
> good. Got the timing light out and lo and hehold, NO SPARK.  So, what im
> trying to figure out, is how i went from running perfectly this morning, to
> now have new battery and bushings, that i dont have spark and a running SHO
> anymore. Any Help/or advice would be appreciated. I hope its not a CKP
> sensor *crosses finger*  Thanks
> 
> Adam Phillips
> 92 White MTX
> 135k
> Tinted, HID's
> Navigated
> ASFB
> 
> _________________________________________________________________
> FREE pop-up blocking with the new MSN Toolbar  get it now!
> http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes