[Shotimes] RE: Dynomax Cat-back fitment issue UPDATE!! Need more input!

[cmichaelo@optonline.net]

Funny how your Dynocrap looks just like it did on mine BEFORE I performed the fiddling that Dave described below.

The rearview appearance of the SHO is IMO one of the worst aspects of the car.  And the mufflers is the main reason and the second reason is the ugly useless pipe running across from the y-branch to the pass side muffler.

Michael
94MTX,green,BOS+,Koni/Intrax,Baer,Corbeau
SHO items for sale: http://hometown.aol.com/cmichaelo/for_sale.html

----- Original Message -----
From: Dave Kegel <d.kegel@comcast.net>
Date: Tuesday, June 13, 2006 5:13 pm
Subject: [Shotimes] RE: Dynomax Cat-back fitment issue UPDATE!! Need more input!

> Looks like you need to rotate the driver's muffler clockwise a bit.
> That will raise the tip up and level out the muffler.  Also, 
> rotate the
> entire rear assembly to the right, which will raise the driver's side
> and lower the passenger side.  Then fiddle with the hangers.
> 
> Dave
> 
> -----Original Message-----
> From: J. B. [mailto:silver1995mtxsho@sbcglobal.net] 
> Sent: Tuesday, June 13, 2006 3:58 PM
> To: TechSHO@topica.com; shotimes@autox.team.net
> Subject: RE: Dynomax Cat-back fitment issue UPDATE!! Need more input!
> 
> 
> 
> I am STILL having trouble with the fitment of my Dynomax exhaust, the
> drivers side muffler is WAY low and there seems no way to arrange 
> it so
> it will sit any higher.
> 
> 
> 
> I am suspecting that I received a bad rear Y-pipe; that the pipe for
> that side is at the wrong angle.
> 
> http://img.photobucket.com/albums/v736/1995mtxsho/My%20SHO/Exhaust/Exhau
> st005.jpg
> 
> 
> 
> Should this pipe be higher?
> 
> http://img.photobucket.com/albums/v736/1995mtxsho/My%20SHO/Exhaust/Exhau
> st006.jpg
> 
> 
> 
> This seems too high, no?
> 
> http://img.photobucket.com/albums/v736/1995mtxsho/My%20SHO/Exhaust/Exhau
> st007.jpg
> 
> 
> 
> Not acceptable....
> 
> http://img.photobucket.com/albums/v736/1995mtxsho/My%20SHO/Exhaust/Exhau
> st008.jpg
> 
> 
> 
> I would like your thoughts and opinions on this.
> 
> 
> 
> 
>  _____  
> 
> 
> From: J. B. [mailto:silver1995mtxsho@sbcglobal.net] 
> Sent: Monday, June 12, 2006 11:18 PM
> To: TechSHO@topica.com
> Subject: Dynomax Cat-back fitment issue
> 
> 
> 
> Does anyone have any tips/suggestions on how to get the drivers side
> muffler to sit higher?
> 
> I have it mocked up, but not clamped anywhere yet.
> 
> The strap around the muffler with the hanger is tight, but seems 
> to let
> it hang about 1.5-2 inches low.
> 
> 
> 
> TIA
> 
> James B.
> 
> --^^---------------------------------------------------------------
> This email was sent to: silver1995mtxsho@sbcglobal.net
> 
> EASY UNSUBSCRIBE click here: 
> http://topica.com/u/?b1dhxA.bOfUDW.c2lsdmVyOr send an email to: 
> TechSHO-unsubscribe@topica.com
> 
> For Topica's complete suite of email marketing solutions visit:
> http://www.topica.com/?p=TEXFOOTER
> --^^---------------------------------------------------------------
> --^^---------------------------------------------------------------
> 
> This email was sent to: d.kegel@comcast.net
> 
> 
> 
> EASY UNSUBSCRIBE click here: 
> http://topica.com/u/?b1dhxA.bP4zHl.ZC5rZWdl
> Or send an email to: TechSHO-unsubscribe@topica.com
> 
> 
> 
> For Topica's complete suite of email marketing solutions visit:
> 
> http://www.topica.com/?p=TEXFOOTER
> 
> --^^---------------------------------------------------------------
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes