[Shotimes] dynomax (easy install)?

[Kenneth Epperly]

Battery powered sawzall, no effort, 28 volts cuts better than the corded 
one.

        Ken
----- Original Message ----- 
From: "Mark Mucher" <mmucher@bellsouth.net>
To: "'bob fisher'" <thunderbird88@comcast.net>; "'Techpriest'" 
<techpriest@ourlair.com>; "'SHO'" <shotimes@autox.team.net>
Sent: Friday, June 16, 2006 9:33 AM
Subject: RE: [Shotimes] dynomax (easy install)?


> Get (or rent) one of those roller-type pipe cutters - worth its weight in
> gold!
>
> mm in sunny FL
>
>
> -----Original Message-----
> From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
> On Behalf Of bob fisher
> Sent: Friday, June 16, 2006 9:24 AM
> To: Techpriest; 'SHO'
> Subject: Re: [Shotimes] dynomax (easy install)?
>
> i did mine on my front street,in town with a floor jack and hand tools 
> with
> an electric impact gun to get the old rusted clamps off.now they say 
> without
> a rod shifter it doesn't fit as well?that i don't know cause i have a plus
> with a rod shifter so mine fit nicely.i also used ati-seize on all my 
> joints
> so when a part does go bad i won't have as hard a time to take it 
> apart.BOB
> ----- Original Message -----
> From: "Techpriest" <techpriest@ourlair.com>
> To: "'SHO'" <shotimes@autox.team.net>
> Sent: Friday, June 16, 2006 7:39 AM
> Subject: RE: [Shotimes] dynomax (easy install)?
>
>
>>I want to replace the exhaust on my 89 before it falls off on it's own.
>>It  is currently being held on with bailing wire and the mufflers have
>>holes  in  them.  Was thinking I would use a catless Y to save money
>>since we don't  cats in KS.  I would go with Dynomax for the rest since
>>it is the only  complete exhaust kit available for the SHO that I have
>>found.  Is this the  kind of job a non-mechanic could do with simple
>>hand tools and a floor  jack  on a weekend?  I do have an air
>>compressor and impact tools, but no way to  weld.  I have got to make
>>friends with somebody with a lift....
>>
>>> got my exhaust on,but not tightened.thing fits like the stock
>>> exhaust.i had actually more trouble getting the old,rusted one
>>> off.finally got the hack saw and fixed that LOL!only thing is the
>>> drivers side muffler does sit a tad lower so i'll have to adjust it
>>> slightly,but not much.thanks to all of you for your help.BOB
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes