[Shotimes] Leftover nut after clutch job

[Edward Mazurek]

Thanks!

I didn't remove the axle nuts or mess around with the struts at all....

I *did* remove the front radius bars so I could sandblast the
subframe and paint it. But, I believe I put them both on. I just had
my son check and they are on. He compared the nuts on the radius bars
and the extra one and the extra one is smaller.

This is killing me!

Thanks for the help!

Please keep those suggestions coming!

Thanks,

Ed

Zach Leahy wrote:

> Hmm.. and 21mm is smaller than the axle nuts, they are like 30mm.
>  
> Other large nuts in the car I can come up with that are in a similar 
> area might be the top nut on a strut, or the net on the front radius 
> rods.....
>  
>  
> Z
>
>  
> On 3/2/06, Edward Mazurek <emazurek@cisco.com 
> <mailto:emazurek@cisco.com>> wrote:
>
>     Hi Mark,
>
>     The two motor mount nuts (I believe) are only 18mm just like the
>     4 subframe bolts. I used the same socket to snug both nuts and
>     all 4 subframe bolts so I'm pretty sure of this. So, they are
>     much smaller than this nut.