[Shotimes] Leftover nut after clutch job

[Edward Mazurek]

Hi guys!

Mystery solved!

First, let me thank each and every one of you that helped.

It was indeed a motor mount nut- 21mm w/flange.

What I had done was put one of the sway bar end link nuts
on the motor mount. The sway bar end links are 18mm but they
fit the same size bolt. Doh!

Thanks again!

Ed

PS: I'm really glad this isn't my day job!

Jim & Debbie Leyden wrote:

>I just checked with Doug Lewis and Mark is correct.  Although they are the
>same thread as the subframe nuts, the motor mounts are 21mm with a flange.
>
>Jim
>
>
>
>-----Original Message-----
>From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
>On Behalf Of Mark Nunnally
>Sent: Thursday, March 02, 2006 11:54 AM
>To: Edward Mazurek; Ian Fisher
>Cc: SHOTimes
>Subject: Re: [Shotimes] Leftover nut after clutch job
>
>21mm nuts (2) are the motor mount nuts, front and rear.  the subframe are
>18mm bolts and the rack nuts are 15/16
>
>mark
>
>-----Original Message-----
>  
>
>>From: Edward Mazurek <emazurek@cisco.com>
>>Sent: Mar 2, 2006 11:29 AM
>>To: Ian Fisher <dataflash@yahoo.com>
>>Cc: SHOTimes <shotimes@autox.team.net>
>>Subject: Re: [Shotimes] Leftover nut after clutch job
>>
>>Hi Ian,
>>
>>I could get a picture but I haven't yet. It takes a 21mm socket
>>so it's big. It is a standard looking nut with the round flange
>>at the bottom. I can get a picture and email it to you.
>>
>>Thanks!
>>
>>Ed
>>
>>Ian Fisher wrote:
>>
>>    
>>
>>>Do you have a picture?
>>>
>>>Ian
>>>
>>>--- Edward Mazurek <emazurek@cisco.com> wrote:
>>>
>>> 
>>>
>>>      
>>>
>>>>Hi,
>>>>
>>>>95 MTX...
>>>>
>>>>I just got the subframe back in and I seem to have
>>>>an "extra"
>>>>large nut left over. :(
>>>>
>>>>I have the 4 subframe bolts in.
>>>>I have the two passgenger side mount nuts in (front
>>>>& rear).
>>>>I have the two huge nuts for the rack in.
>>>>I have the two driver's side subframe to mount bolts
>>>>in.
>>>>I also have the two smaller nuts for the driver's
>>>>side
>>>>shock mount that go to the trans.
>>>>
>>>>What am I missing?
>>>>
>>>>BTW, the 96 subframe bushings worked great! I didn't
>>>>even have to
>>>>trim the ridges off as my subframe had the
>>>>corresponding notches
>>>>already.
>>>>
>>>>Thanks!
>>>>
>>>>Ed
>>>>_______________________________________________
>>>>Shotimes mailing list
>>>>Shotimes@autox.team.net
>>>>http://www.team.net/mailman/listinfo/shotimes
>>>>        
>>>>
>>>Tired of spam?  Yahoo! Mail has the best spam protection around 
>>>http://mail.yahoo.com 
>>>      
>>>
>>_______________________________________________
>>Shotimes mailing list
>>Shotimes@autox.team.net
>>http://www.team.net/mailman/listinfo/shotimes
>>    
>>
>_______________________________________________
>Shotimes mailing list
>Shotimes@autox.team.net
>http://www.team.net/mailman/listinfo/shotimes