[Shotimes] Installing SS brake lines on a 95 MTX

[Ian Fisher]

These sound like the Earl's lines. Yes, I believe you
need to use a round file to enlargen the bracket
holes. I did this when I installed the Earl's lines in
the rear of my 93. My front has TCE lines which
utilize the stock bracket and hardline adaptor with a
different fitting welded to it. (IOW, I didn't mess
with the front). I do believe that the spring points
forward for the front lines. Make sure you install
them exactly how they are labeled as there are 3
different hardline fittings on this car.

Ian

--- Edward Mazurek <emazurek@cisco.com> wrote:

> Hi,
> 
> I bought a set of SS brake lines since I'm re-doing
> all
> of my brakes on my 95 MTX. These were from the
> w-body store.
> 
> Of course there weren't any instructions and I'm
> finding
> that they don't fit thru the bracket that bolts to
> the
> inside wheel well and also supports the ABS sensor.
> 
> They have a spring kind of fitting that is
> completely
> different than the Ford one.
> 
> Does anyone know what I'm supposed to do? Am I
> supposed to grind out the inside of the bracket to
> make the hole bigger (and round)?
> 
> Any help is appreciated!
> 
> Thanks,
> 
> Ed Mazurek
> _______________________________________________
> Shotimes mailing list
> Shotimes@autox.team.net
> http://www.team.net/mailman/listinfo/shotimes
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com