From emazurek at cisco.com  Tue Jun  7 06:30:27 2011
From: emazurek at cisco.com (Edward Mazurek)
Date: Tue, 07 Jun 2011 08:30:27 -0400
Subject: [Shotimes] Advice on clutch job
Message-ID: <4DEE19E3.8040000@cisco.com>

95 MTX

I replaced by clutch 5 or so years ago with shonut stuff including the 
the  ceramic throwout bearing.

Looks like it needs to be replaced again. What's the current best place 
and parts to get? This is
just a daily driver for my son. Is the ceramic TOB good enough to reuse? 
I know that's normally
a no-no.

Thanks,

Ed Mazurek

From cgodshall_2000 at yahoo.com  Wed Jun  8 09:17:28 2011
From: cgodshall_2000 at yahoo.com (Chris)
Date: Wed, 8 Jun 2011 11:17:28 -0400
Subject: [Shotimes] Advice on clutch job
In-Reply-To: <4DEE19E3.8040000@cisco.com>
References: <4DEE19E3.8040000@cisco.com>
Message-ID: <8D92EE40-59F1-470E-AE0C-E8D41661D5F8@yahoo.com>

Not sure on the best source for parts as I have been out of the sho's for a
while. But as for the tob, I would replace it since you are in there, you
don't want to open it back up after the replacement.



On Jun 7, 2011, at 8:30 AM, Edward Mazurek <emazurek at cisco.com> wrote:

> 95 MTX
>
> I replaced by clutch 5 or so years ago with shonut stuff including the the
ceramic throwout bearing.
>
> Looks like it needs to be replaced again. What's the current best place and
parts to get? This is
> just a daily driver for my son. Is the ceramic TOB good enough to reuse? I
know that's normally
> a no-no.
>
> Thanks,
>
> Ed Mazurek
> _______________________________________________
>
> Shotimes at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://www.team.net/mailman/options/shotimes/cgodshall_2000 at yahoo.com