[Spits] cleaning electrical bullet connectors

[Mackmi at usa.redcross.org]

..and if your don't care about originality, just function; then solder
the wires together, and shrink-tube over the joint.

Mike Mack
79 Spit
70 GT6+
74 VW Thing

-----Original Message-----
From: spitfires-bounces+mackmi=usa.redcross.org at autox.team.net
[mailto:spitfires-bounces+mackmi=usa.redcross.org at autox.team.net] On
Behalf Of Doug Braun
Sent: Friday, August 29, 2008 11:13 AM
To: Richard Gosling; Doug Braun
Cc: spitfires at autox.team.net; tr3driver at ca.rr.com;
triumphs at autox.team.net; tr8 at mercury.lcs.mit.edu;
mark.jones at exxonmobil.com
Subject: Re: [Spits] cleaning electrical bullet connectors

You are 100% correct.  EVERY new Spitfire owner
should immediately go buy a dozen of them.

Doug


--- Richard Gosling <rbgosling at googlemail.com> wrote:

> Frankly I wouldn't even think of cleaning an old
> bullet connector block.
> Every old one I ever have to have any dealings with
> gets replaced
> immediately, without question.  They're not exactly
> expensive.
Spitfires at autox.team.net
http://autox.team.net/mailman/listinfo/spitfires

http://www.team.net/archive