[Spits] Fuel Pump Blanking Plate

[Doug Braun]

Does your car still have a PVC setup?  If so, there
should generally not be any pressure build-up.

Even if you have no way to hook up a PVC valve
(non-stock carb?), the hose fitting on the rocker arm
cover should be able to provide venting.

Doug Braun
'72 Spit


--- Daniel Parrott <parrotthead01 at comcast.net> wrote:

> Does anyone make a pre-fab Fuel Pump Blanking plate
> with a built-in vent for
> a 1980 Spitfire 1500?  I'm building up too much
> crankcase pressure and oil
> is spurting out the dipstick (again).
> __