[Spits] Upper wishbone bush install

[Doug Braun]

--- On Sun, 2/15/09, Rob T. Getzinger <RTGetzinger at scif.com> wrote:

> From: Rob T. Getzinger <RTGetzinger at scif.com>
> Subject: [Spits] Upper wishbone bush install
> To: "Spitfire list" <spitfires at autox.team.net>
> Date: Sunday, February 15, 2009, 7:11 PM
> There is always at least one bolt that rust solid into the
> front suspension
> bushings. I had to cut mine out after trying everything
> else. I tried using a
> vise to push in a new bushing and it bulged and then
> wouldn't budge in
> further. I tried using grease and still only slight
> movement with a bulge in
> the rubber keeping it from going in further.
> What is the method to install stock busings back into the
> upper wishbone?
> Thanks,
> Rob
> 
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> This e-mail message from State Compensation Insurance Fund
> and all attachments
> transmitted with it
> may be privileged or confidential and protected from
> disclosure. If you are
> not the intended recipient,
> you are hereby notified that any dissemination,
> distribution, copying, or
> taking any action based on it
> is strictly prohibited and may have legal consequences. If
> you have received
> this e-mail in error,
> please notify the sender by reply e-mail and destroy the
> original message and
> all copies.
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> _______________________________________________
> 
> Support Team.Net  http://www.team.net/donate.html
> 
> Spitfires at autox.team.net
> http://autox.team.net/mailman/listinfo/spitfires
> 
> http://www.team.net/archive