[Spits] Triumph GT6 overdrive shift lever (155301)
Doug Braun
doug at dougbraun.com
Mon Oct 14 13:07:43 MDT 2019
Is the GT6 OD shift lever different than the Spitfire OD lever?
Doug
On Mon, Oct 14, 2019, 2:35 PM v6spitfireguy v6spitfireguy <
v6spitfireguy at cox.net> wrote:
> Since the GT6 overdrive gear shift lever for the knob mounted switch (part
> number 155301) is made of unobtiainum and finding hens teeth is easier than
> locating a used one, I would like to machine another, correct one for my
> GT6. Originally when I machined the one in my car now, I didn’t have a
> GT6 lever only a Spitfire Non OD lever, and I patterned it after that.
> However they are a bit longer than the GT6 overdrive ones and I haven’t
> been able to find a correct lever or even one in a car to measure it. So
> if anyone has a GT6 with overdrive, and could give me a measurement I can
> extrapolate the rest. The current OD lever I made, when shifted into first
> gear measures 10 inches from the top rear of the tunnel to the highest part
> of the shift knob cap (the one with the switch in it). If I could get a
> similar measurement from a GT6 with the original OD lever in it, I can
> guesstimate the rest. I don't want the column mounted switch, I LIKE the
> lever mounted one, but I would like it to be the correct length.
>
> Of course, I would prefer to just purchase one if reasonable...
>
>
> Barry Schwartz
> _______________________________________________
>
> Spitfires at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spitfires/doug@dougbraun.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/spitfires/attachments/20191014/830bd24f/attachment.htm>
More information about the Spitfires
mailing list