[Spridgets] Rib Case Gear box question AGAIN

[Chris Manuel]

I never had them apart.  I have no problem taking it off, but I have no idea
how to align it back up if I do, even when reading the Bentley book.  Is it
tough?

I had an old motorcycle that did this once, but figured this was a little
more involved considering the rear end and all.


-----Original Message-----
From: Jack Laird [mailto:jlaird237 at cox.net] 
Sent: Tuesday, July 03, 2007 1:22 PM
To: Chris Manuel; 'Spridget Mailing List'
Subject: Re: [Spridgets] Rib Case Gear box question AGAIN

If you did not have the pressure plate off when the tranny was out the 
chances are preaty good.


----- Original Message ----- 
From: "Chris Manuel" <cmanuel at wi.rr.com>
To: "'Spridget Mailing List'" <spridgets at autox.team.net>
Sent: Tuesday, July 03, 2007 12:01 PM
Subject: [Spridgets] Rib Case Gear box question AGAIN


> Hi all-
>
> So I finally got things to line up well.  I think I uncovered another
> problem though...what are the chances of the clutch plates stuck together?
>
> If I spin the engine and move the clutch lever the tail shaft still moves.
>
> Not really a good sign, right?
>
> Chris
> 66 MKIII
> Brookfield, WI
>
>
>> Hi-