[Spridgets] need a Mini expert

[miniac7 at aol.com]

?The header style exhaust manifold?you're refering to?was used on the following Cooper and Cooper S models:


All Mk I, II 997 & 998 Coopers 10/61 through 11/69

?

All Mk I, II, III 970, 1071 & 1275 Cooper S 3/63 through 7/70.

?

The 1275 S one was slightly taller for the taller block than the 997/998 Cooper one. I seem to remember the 970 and 1071 being the same as the 1275, but I could be wrong. 

?

Hope this helps,
Howard Collins
Virginia Beach, Va.



-----Original Message-----
From: Wm. Severin Thompson <wsthompson at thicko.com>
To: Miniac7 at aol.com; spridgets at autox.team.net; team-thicko at autox.team.net
Sent: Sun, 15 Jul 2007 1:21 pm
Subject: Re: [Spridgets] need a Mini expert



I misspoke. it was not cast, but a pressed steel welded header used on
Cooper S's.

 

I'm assuming they were used on 1275 motors.

 

From: Miniac7 at aol.com [mailto:Miniac7 at aol.com] 
Sent: Sunday, July 15, 2007 12:16 PM
To: wsthompson at thicko.com; spridgets at autox.team.net;
team-thicko at autox.team.net
Subject: Re: [Spridgets] need a Mini expert

 

I'm certainly no "expert" but feel the question would be easier to answer if
asked, "What year/model did the Mini NOT have a cast header?" Thinking about
it however,  I'm not sure what "cast header" means. The combination
intake/exhaust manifold was cast iron from the very first Mini, before
moving on to a 3 into 1 exhaust only type design, so I am having trouble
figuring out what the question is. Please clarify. 

 

Howard Collins

Virginia Beach, Va.





  _____  

Get a sneak peak of the all-new AOL.com
<http://discover.aol.com/memed/aolcom30tour/?ncid=AOLAOF00020000000982> .
_______________________________________________
miniac7 at aol.com

Edit your replies

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets


________________________________________________________________________
AOL now offers free email to everyone.  Find out more about what's free from AOL at AOL.com.