[Spridgets] Camshaft question

[Paul Asgeirsson]

Only the earliest Spridgets and all the Morris Minors had the one cam
bearing.  All the others had 3.

If this is a rebuild, have the machine shop open up those bores to accept
the 3 cam bearings.  Otherwise, let it run on one.  They still lasted a long
time that way.

Paul A

----- Original Message ----- 
From: "Robert E. Shlafer" <pilotrob at webtv.net>
To: "K.Valentine" <kevin at valentinephoto.net>; "Spridgets"
<Spridgets at autox.team.net>
Sent: Wednesday, November 07, 2007 6:32 PM
Subject: Re: [Spridgets] Camshaft question


> I dunno but 948's have only one camshaft "bearing" while 1275's have
three? I would think a call to 1-800-aptfast
> would resolve the question post-haste though I'm sure Paul, Pete or Ed
would know.
>
> But somehow, I have a feeling Frank Clarici will clarify the issue in his
next post!! :)
>
> Cap'n. Bob      '60 :{)
>
>
> -----Original Message-----
> From: K. Valentine
> Sent: Wednesday, November 7, 2007 8:31 PM
> To: Spridgets
> Subject: [Spridgets] Camshaft question
>
> Hey All,
>
> Will a stock camshaft from a 1275 fit (and work) in a 948?
>
> I have a friend who needs a cam in a 948 and I have a few 1275 stock
> cams....
>
> Thanks,
>
> Kevin V.
> _______________________________________________
> pilotrob at webtv.net
>
> Edit your replies
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
> _______________________________________________
> pasgeirsson at worldnet.att.net
>
> Edit your replies
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets