[Spridgets] Bugeye ignition sw.

[Hal Faulkner]

At the buster cluster I learned (from Frank, et al) that an appropriately
sized hose clamp will do quite nicely to hold the headlight/ignition switch
in position.  Not concours, but readily available and more effective than
the official little wire clip.

Hal

-----Original Message-----
From: spridgets-bounces+hal=katemuir.com at autox.team.net
[mailto:spridgets-bounces+hal=katemuir.com at autox.team.net]On Behalf Of
Mike/Donna Carpenter
Sent: Tuesday, February 19, 2008 11:34 AM
To: vern at srvinet.com; Spridgets at autox.team.net
Subject: Re: [Spridgets] Bugeye ignition sw.


The Bugeye switch does rely on a wire clip and it works very well.  I do not
know where you would buy one but that is what you need.

Mike C

-----Original Message-----
>From: "vern at srvinet.com" <vern at srvinet.com>
>Sent: Feb 19, 2008 2:02 PM
>To: Spridgets at autox.team.net
>Subject: [Spridgets] Bugeye ignition sw.
>
>My bugeye came comepletely disassembled and I can't see
>what holds the ignitions sw. in the dash.  In mosses catalogue
>there looks to bed some kind of wire clip or something, but it
>doesn't look like it would hold anything.  Hate to rely
>on glues. :-)
>Vern
>
>--
>See my
>59 bugeye
>78 MGB
>79 midget RB at: