[Spridgets] Sticking brake master
Frank Clarici
spritenut at comcast.net
Wed Jul 30 14:10:41 MDT 2008
Try adjusting the master push rod.
Make it shorter just a 1/4 turn or so.
My guess is that it is not letting the fluid back past the bleed back hole.
It could be that the clutch and brake master rods got mixed up when the
unit was worked on.
If your brakes are rock hard and the pedal is way up firm and high,
adjust that rod.
--
Frank Clarici
Toms River, NJ
More information about the Spridgets
mailing list