[Spridgets] Engine pull

[Jack Laird]

3/8th drive works for me and always has. Thought it was what we were supose 
to use. shrug.

----- Original Message ----- 
From: "Frank Clarici" <spritenut at comcast.net>
To: "Jim Johnson" <bmwwxman at gmail.com>; "Spridgets" 
<spridgets at autox.team.net>
Sent: Sunday, June 15, 2008 8:25 AM
Subject: Re: [Spridgets] Engine pull


> Jim
>
> Try just the square end of a 3/8 drive ratchet. That usually works.
> The size is probably 7/16" square, so a 1/2" drive ratchet needs to be
> ground down a bit but a 3/8, although loose, works unless the PO torqued
> the hell out of it.
>
> -- 
> Frank Clarici
> Toms River, NJ
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as jlaird237 at cox.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 270.3.0/1501 - Release Date: 6/13/2008 
6:33 AM