[Spridgets] 295 head content

[Larry Daniels]

John forgot to add the volume above the rings and below the deck of the 
block (minus the piston dish, since he did add that in there) to the unswept 
volume.

LAD


----- Original Message ----- 
From: "Robert Weeks" <lists at woozy.com>
To: "Ron Soave" <soavero at yahoo.com>
Cc: "Spridgets" <spridgets at autox.team.net>
Sent: Sunday, March 23, 2008 7:07 PM
Subject: Re: [Spridgets] 295 head content


There is a pretty good video from University Motors on you-tube showing
how to do this:

http://youtube.com/watch?v=OGuOMItsCXk

Robert

Ron Soave wrote:
> --- Jack Laird <jlaird237 at cox.net> wrote:
>
>> The question is how much decking to keep the
>> cylinder volume about the same or
>> a bit less so the compression is just a bit higher.
>> What do I need to tell my head guy needs to come
>> off
>>
>
> Jack,
> I would not rely on a predetermined amount - it's much
> safer and easy to just do the math or have the
> machinist do it:
>
> To get a decent idea, you need 5 key volumes which add
> the unswept volume, plus cylinder swept volume:
You are subscribed as ladaniels at sbcglobal.net

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets