[Spridgets] tranny

[Mark Wemple]

FYI everything is still in the tranny but for the 1st gear fork and the arm it clamps to. The full gearset is in place and, unless it is easy to remove, I'd rather not go there.

Mark

--- On Mon, 5/5/08, Frank Clarici <spritenut at comcast.net> wrote:

> From: Frank Clarici <spritenut at comcast.net>
> Subject: Re: [Spridgets] tranny
> To: "Glen Byrns" <grbyrns at ucdavis.edu>
> Cc: markwemple at yahoo.com, "Spridgets" <spridgets at autox.team.net>
> Date: Monday, May 5, 2008, 5:41 PM
> Glen Byrns wrote:
> > OOOO!!! Teacher teacher... pick me!  I know that one!
> >
> >   
> 
> Me too!!!
> I use a hose clamp instead of a zip tie.
> set all the springs and balls then punch down on the top to
> set them all 
> in place.
> Do this on a large white sheet just incase the balls go
> flying.
> 
> -- 
> Frank Clarici
> Toms River, NJ


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ