[Spridgets] 5spd

[David Lieb]

> There's no real machining to speak of, you have to CENTER the Datsun 
> clutch plate and redrill and tap the holes for the clutch cover bolts and 
> locator pins.  Done.
> Paul did the one for my Sprite and I'm doing the one I've got for the 
> Morris.

Nope. Wrong again ;-)
This is a Rivergate kit. It uses the stock Spridget clutch pressure plate 
(with a custom clutch disk). The difference is probably the seal kit for the 
rear main bearing which is incorporated into the adapter plate. Might want 
to call Bill Perry at Rivergate and ask.
David Lieb