[Spridgets] Master Cylinder

[corvallis at peoplepc.com]

It has been a while. I remove a stuck piston by rapping the open end on a
block of wood; momentum will move it to the open end. If the plug that is in
the top does not want to come out, leave it. Just rinse everything out with
cheap brake fluid when you're done honeing (sp.) ...bill in oregon
============================================================
-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of hmortada at aol.com
Sent: Monday, November 17, 2008 1:43 PM
To: spridgets at autox.team.net
Subject: [Spridgets] Master Cylinder

I am overhauling the master cylinder on my 79 Midget and having a hard time
removing the piston from the cylinder. That is where the white plastic thing
on the top, it is not coming off.
It is a dual line master cylinder.
Thanks,
Hadi
________________________________________________________________________