[Spridgets] aiming headlights

[Jack Laird]

Phill. Measure up from the floor to the center of the lights. then a peice 
of tape on the inside of the garage door the same height. Tape on the door 
straight out from the head lights as well. Line up the car and adjust your 
lights.


----- Original Message ----- 
From: "Phil Nase" <nases at verizon.net>
To: "spridgets Spridgets at autox.team. Net" <spridgets at autox.team.net>
Sent: Wednesday, November 26, 2008 5:59 PM
Subject: [Spridgets] aiming headlights


> Any rules of thumb for aiming headlights to get them at least close to
> correct before I take it out for a nighttime spin?
>
> Also, the bugeye bonnet lock handle is held in place by putting a
> screw in the end and spreading the shaft?  Or is there a pin or
> something to use?
>
> Phil Nase
> Quakertown, PA
> http://home.comcast.net/~philnasecpa/
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as jlaird237 at cox.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.175 / Virus Database: 270.9.10/1813 - Release Date: 11/26/2008 
8:53 AM