[Spridgets] stripes

[uniquelittlecars at yahoo.com]

Frank is correct.
 
I have never put the stripes on - I have watched a shop as they did a delivery
van. I have removed the stripes from new cars with a heat gun on a hot day.
They come off fairly easy. The only problem is if the car is the sun for a
long time the color under the decal or vinyl is a different color. So make
sure you really want them for good before putting them on your car.
 
Vigil 

--- On Tue, 9/9/08, Frank Clarici <spritenut at comcast.net> wrote:

From: Frank Clarici <spritenut at comcast.net>
Subject: Re: [Spridgets] stripes
To: lindalnhvt at nhvt.net
Cc: spridgets at autox.team.net
Date: Tuesday, September 9, 2008, 7:13 PM

lindalnhvt at nhvt.net wrote:
> I have a newly painted (today) leaf green bugeye. Before I start to put
> everything back on, I'm giving serious consideration to stripes, wide
ones
> like the red on silver ones on an earlier post, but perhaps Old English
> White on the Leaf Green.  My question is--- how do you get clean edges?  I
> had someone paint Shelby stripes on my 66 Mustang fastback, and I helped
> apply the tape, but I don't remember what kind if tape we used.
> Also, if you paint the stripes, how do you rough up the new paint only
> where the stripes are intended to go?
> Thanks.
>
>
Dick

Kevin and I have stick on stripes that my Dad made.
Mine are Oyster white (close to OEW) on a blue Bugeye,
5 years now and no problems with the stripes.
With his vinyl, you spray windex on the body, position the stripes, use
a credit card to get any bubbles out, and when the windex is dry, the
stripes are permanent. A heat gun is supposed to remove them if you
change your mind.
Let me know if you want to go this route, I'll give you his email and
you can deal directly with him.


--
Frank Clarici
Toms River, NJ
You are subscribed as uniquelittlecars at yahoo.com

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets