[Spridgets] HELP Diagnosing a Clutch Problem
Chris King
cbking at alum.rpi.edu
Thu Sep 18 06:52:26 MDT 2008
As has been mentioned, thrust washers could be it. Also, did you change
the throw-out bearing for the clutch? They are presssed in and are a
PITA, but that's the only other moving thing.
Is that plastic hydraulic line OK?
Chris King
http://home.comcast.net/~kvcbk/
<-----Original Message----->
From: Kevin Valentine [kevinv1275 at gmail.com]
Sent: 9/17/2008 9:43:53 PM
To: spridgets at autox.team.net
Subject: [Spridgets] HELP Diagnosing a Clutch Problem
Hey All,
The clutch is in a 1500 Midget. We recently swapped engines. All
was fine immediately after the swap but the following symptoms have
begun to surface;
When the engine is off and the clutch is depressed, it feels like a
normal clutch. (Easy to push in and release).
When the engine is running the clutch is much more difficult to
depress and the pressure pushing back on the pedal (pedal resistance)
is more than when the engine is not running.
There is no noise or vibration associated with this problem. It's
just much harder to push in the clutch pedal with the engine running
than it is with the engine not running.
Any Ideas?
Kevin V.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
You are subscribed as cbking at alum.rpi.edu
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
.
More information about the Spridgets
mailing list