[Spridgets] Nisonger Rebuild

[Frank]

rrengineer @dslextreme.com wrote:
> I just got a package from UPS from Nisonger's.  I had my combination gauge
> for my Bugeye rebuilt by them.  The restoration work is stunning.    It
> looks like a brand new instrument.  One small problem, the oil pressure
> needle is flopping around loosely.  Very disappointing.
> Mike MacLean
> 60 Sprite
> 56 BN2
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as spritenut at comcast.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>
>   
That is an easy fix, twist off the bezel, gently push the needle back on 
the point.
It should be zeroed out but you can double check it with 20 psi of air, 
then 40, etc.
As long as your air pressure from the compressor is correct, it will 
check the oil pressure.

-- 
Frank Clarici
Toms River, NJ
My own Fleet of Sprites