[Spridgets] Sway Bar Question

[Dave Yealy]

I just drilled the needed holes without the backing plates. Has 
worked fine for me for 5 years so far. Unless you are racing it I 
wouldn't be real concerned about the backing plate.

Dave
60, 61, 61 bugeyes


At 08:04 PM 4/28/2009, you wrote:
>I just bought a used sway bar assembly for the Bugeye.  The tapped holes on
>the underside of the ends of the frame extensions are there for the rubber
>mount straps but there are no holes in the front face of the wishbone/spring
>pans for mounting the link brackets.  Evidently there were two types of
>wishbones - those with holes for the sway bar option and those without if the
>option was not part of the build plan.  Is it SOP to drill the holes into the
>leading face of the wishbone/spring pans to fit the sway bar link brackets?
>Any particular location or just drill them when the links are
>positioned vertically?