[Spridgets] FW: Picklex for rust before priming no prep steps no rinse

[Linda Grunthaner]

I just ordered a 16oz bottle of this Picklex20 stuff. I'll report back next
week.
Lin

On Sun, Aug 2, 2009 at 12:38 PM, Paul Asgeirsson <PAsgeirsson at att.net>wrote:

> Hi Linda,
>
> I've used these phosphoric acid products like picklex in the past.  They
> all
> work just about the same, but are useless if you don't remove any "Scales"
> of rust that might be on the surface.
>
> So pay strict attention to getting the surface down below that before you
> use any of these surface prep products.
>
> Using these items is an absolute easy thing, prepping the surface to get
> them so the product will work right is sheer drudge work!
>
> Just don't expect these things to do the work for you, it's still up to you
> to get down through the last layer of rust to the steel.
>
> Later, Paul A
>
>
> ----- Original Message -----
> From: "Linda Grunthaner" <grunthaner at gmail.com>
> To: <corvallis at peoplepc.com>
> Cc: <spridgets at autox.team.net>
> Sent: Sunday, August 02, 2009 6:06 AM
> Subject: Re: [Spridgets] FW: Picklex for rust before priming no prep steps
> no rinse
>
>
> > Bill,
> > I think I'll try that 16oz spray for $35.00 and go from there if anyone
> has
> > tips on the best use for this let us know. Lin
> >
> > On Sat, Aug 1, 2009 at 3:50 PM, <corvallis at peoplepc.com> wrote:
> >
> > > I will guess .yes. I emailed the company via the picklex.com site;
> asked
> > > if
> > > they had a way of buying their product online.
> > >
> > >
> > >
> > > "For ordering, please visit the web site www.picklex20.com and order
> > > through
> > > the On-Line Store which has all the sizes, prices etc..
> > >
> > > Please let me know if you have any problem ordering. Also please let me
> > > know
> > > if you have any specific question.
> > >
> > > Regards,
> > >
> > > R. Sen
> > >
> > > ICP, Inc.
> > >
> > > 256-650-0088"
> > >
> > >
> > >
> > >  _____
> > >
> > > From: Linda Grunthaner [mailto:grunthaner at gmail.com]
> > > Sent: Saturday, August 01, 2009 12:11 PM
> > > To: corvallis at peoplepc.com
> > > Cc: spridgets at autox.team.net
> > > Subject: Re: [Spridgets] FW: Picklex for rust before priming no prep
> steps
> > > no rinse
> > >
> > >
> > >
> > > Bill,
> > >
> > > Is the Picklex20 the same thing? I was on the site
> > > <http://picklex.com/home.html> http://picklex.com/home.html
> > >
> > > Lin?
> > >
> > > On Sat, Aug 1, 2009 at 8:02 AM, <corvallis at peoplepc.com> wrote:
> > >
> > > I emailed them at picklex.com
> > >
> > > They say they have an online store at www.picklex20.com
> > >
> > > .bill in oregon
> > > _______________________________________________
> > > Support Team.Net  http://www.team.net/donate.html
> > >
> > > You are subscribed as grunthaner at gmail.com
> > >
> > > http://www.team.net/archive
> > >
> > > http://autox.team.net/mailman/listinfo/spridgets
> > _______________________________________________
> > Support Team.Net  http://www.team.net/donate.html
> >
> > You are subscribed as pasgeirsson at worldnet.att.net
> >
> > http://www.team.net/archive
> >
> > http://autox.team.net/mailman/listinfo/spridgets