[Spridgets] Vega Wheels
Glen Byrns
grbyrns at ucdavis.edu
Fri Feb 6 22:30:58 MST 2009
I found that the rub was at the bulge of the rear axle center. I relieved
the radius of the wheels a bit with an angle grinder until they cleared.
The front has spridget disc brake hubs, but didn't foul at all.
Glen
> Not sure if mine were 6" Dave.
> But they were steel and had the square holes going around the perimeter.
> I definitley remember that I had to use the spacers because the hole
> would
> hit the fillet radius on the center of the front hubs.
More information about the Spridgets
mailing list